Perhitungan pph 21 online. PAN • TILT • ZOOM COLOR CAMERA PTC-400C INSTRUCTION MANUAL. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. The pages 9 to 13 of this manual, and carefully check the safety, such as falling prevention. - 3 - HANDLING PRECAUTIONS - 4. Summary of Contents for Elmo PTC-400C Page 1 PAN • TILT • ZOOM COLOR CAMERA PTC - 400C INSTRUCTION MANUAL Please read this instruction manual carefully before using this PTC-400C and keep it for future reference.

Likes 0 Scaricamenti 0 Sommario delle specifiche per Miele Elmo PTC-401CIP • PAN • TILT • ZOOM COLOR CAMERA PTC-401C IP INSTRUCTION MANUAL Please read this instruction manual carefully before using. • IMPORTANT SAFETY INSTRUCTIONS 1.

Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. • CAUTION INFORMATION RISK OF ELECTRIC SHOCK DO NOT OPEN This equipment has been tested and found to comply with. • HANDLING PRECAUTIONS ■ Do not use any AC adapter other than the one supplied with the product. ■ This Camera.

• • We will not be liable for any damage arising out of or resulting from malfunction or hung-up of. • CONTENTS IMPORTANT SAFETY INSTRUCTIONS....1 HANDLING PRECAUTIONS.....3 CONTENTS.......5 1. PART NAMES AND FUNCTIONS....7 2.

WIRELESS REMOTE. • (12) FTP Setup......52 (13) User Setup......54 (14) IP filtering Setup......56 (15) Camera Control Setup.....57 (16). PART NAMES AND FUNCTIONS ● Main unit ETHERNET TERMINAL (RJ-45) AUDIO OUTPUT (Green) AUDIO INPUT (Blue) ALARM IN-OUT TERMINAL. • ● Wireless Remote Controller 2 PRESET 1 POWER 3 ID 5 RESET 6 AUX 4 NUMBER 8 OPEN 9 CLOSE. WIRELESS REMOTE CONTROLLER Point the infrared emitter of the wireless remote controller to the infrared sensor located on the. • Note: The batteries supplied with the Camera are only for use in initially confirming the operation of the Camera. SETTING UP [1] Installation Note: When carrying the Camera, be sure to hold the base.

Note: Do not turn. • WARNING:Fasten the fixing screws of the fixing plate firmly, or the Camera could fall, causing injury. (2) Mounting the Camera. • (3) Mounting the Safety Wires 1.Loop up one end of the Safety Wires through the respective safety wire looping holes. • 2.Lock the Camera and the fixing plate with the set screws (supplied). SET SCREW M3×5, 1 PCE (supplied) [2].

• ● Connection of the Camera Speaker AUDIO OUTPUT (Green) with amplifier RS-485 Microphone (5P connector (white)) AUDIO INPUT (Blue) To. OPERATION PROCEDURES [1] Power ON/OFF The Camera has no POWER switch. The power supply to the Camera is turned. • [3] PAN/TILT operation • While watching the screen, press any of 15 2 (UP, DOWN, LEFT, RIGHT) direction buttons for.

• (2) Focus operation • When 10 AUTO button of FOCUS is pressed, the FULL AUTO FOCUS status is established. • [5] Preset operation The Camera head direction, the zoom position, the focus status and the brightness level can be registered. THE ID NUMBER (REMOTE ID) SETTING When multiple Cameras are laid out adjacently and operated via the wireless remote. SETTING IN THE OSD (ON-SCREEN DISPLAY) MENU Each time 17 MENU button is pressed, the OSD menu is turned. • [ 1 ] MAIN CONTROL Name Function Factory Settings 2 SET INDICATE To turn ON/OFF the screen display of the.

• [ 2 ] CAMERA1 Name Function Factory Settings 2 HS-SHUTTER To select the high-speed shutter speed [OFF (1/60s), OFF 1/100s. • [ 3 ] CAMERA2 Name Function Factory Settings 1 BLC To set the backlight compensation function to [ON/OFF]. • [ 3 ] CAMERA2 Name Function Factory Settings INDOOR This function is selected when the Camera is used indoors. • [ 4 ] MASKING Name Function Factory Settings LOCATION To set the mask position, display the [LOCATION] Set window, move.

• [ 6 ] PAN TILT Name Function Factory Settings 1 MOTOR SPEED To select the motor speed setting [AUTO/MANUAL] for. • [ 6 ] PAN TILT Name Function Factory Settings 5 FLIP ANGLE When the rotation angle exceeds 90˚(the Camera is. Alarm Alarms are caused by “alarm 1,” “alarm 2,” and “motion detection.” You can set an alarm action for. RS-485 By wiring and connecting the RS-485 terminal of the 5P connector (white) to an RS-485 control equipment, the. SOUND Sound of the microphone connected to the Camera can be output from the speaker connected to a. SETTING OF VARIOUS MODES The following mode can be selected by setting 4-pin DIP switches No. NETWORK FUNCTION You can use the following functions of the Camera from the host (PC) on a network.